Cooling plates/radiators for wine cooling

150,00 393,00  without VAT

The cooling plates are used for controlled fermentation of grape musts. They are installed in fermentation tanks. The plate consists of two stainless steel pressed plates welded into a rigid unit. The inlet of the cooling medium is from the side (type CHP-ZH) or from the top (type CHP-ZB).

  • Material: 17 241 (AISI 304)
  • Thickness of sheet: 1/1 mm
  • Brightness of fittings: G 1/2″
  • Operating pressure: 6 bar
  • Surface treatment: polishing
  • Available widths of the cooling plate: 151 mm / 5.94 inch, 207 mm / 8.14 inch, 263 mm / 10.35 inch, 319 mm / 12.55 inch, 375 mm / 14.76 inch, 431 mm / 16.96 inch
Connection

From the side; From above

Fastening type

Screwing; Welding

Width

375 mm /14.76 inch; 431 mm / 16.96 inch

Height

500 mm / 19.68 inch 750 mm / 29.52 inch 1,000 mm / 39.37 inch 1,250 mm / 49.21 inch 1,500 mm / 59 inch 2,000 mm / 78.74 inch 2,500 mm / 98.42 inch 3,000 mm / 118 inch

Cooling surface in square meters/ square feet

0.375 m²/4.036 ft², 0.431 m²/4.639 ft², 0.560 m²/6.028 ft², 0.647 m²/6.694 ft², 0.750 m²/8.073 ft², 0.862 m²/9.278 ft², 0.938 m²/10.097 ft², 1.076 m²/11.582 ft², 1.125 m²/12.109 ft², 1.293 m²/13.918 ft² , 1.500 m²/16.146 ft², 1.724 m²/18.557 ft², 1.875 m²/20.182 ft², 2.155 m²/23.196 ft², 2.250 m²/24.219 ft², 2.586 m²/27.835 ft².

Related products

Nákupný košík
Návrat hore